LC Design Systems

Custom Office Partitions and Components

Partitions on Wheels

LC Truck sets, Standard: $73 per set (2 pc) Adjustable for tilt: $88 per set

2 inch diameter caster wheels for moveable office partitions

2 inch diameter caster wheels for moveable office partitions vertical design     2 inch diameter caster wheels for moveable office partitions horizontal design

2 inch diameter caster wheels for moveable office partitions multiple panels

angled trucks

2 inch diameter caster wheels for moveable office partitions stacked partitions

2 inch diameter caster wheels for moveable office partitions multiple angles and panels

Large 2" diameter caster wheels with 1" wide wheels will roll over most anything in an office without skidding. Easy to connect or disconnect. Easy to stack away, easily accepts any LC Panel. No tools necessary. Caster wheels have ball bearing swivels for 360° rotation. Frames are heavy duty 2" X 1" rectangular steel tubing (.063 thickness)and mig welded at all joints and intersections for strength (no spot welds anywhere).

The design of the LC Truck allows for any LC panel to fit. Regardless of size or orientation.

2 piece design, will hold any LC panel, whether configured "horizontal or "vertical". These trucks simply snap into each lower corner of any LC panel, for instant mobility.

LC Trucks will allow mulitple panels to be placed end to end, gap free. Bolt holes are provided for more permanent end to end connections.

 

Angles up to 90°+ are no problem. the wheels do not touch each other. Some competitors have the wheels at the "end" of the panel, so a 90° angle cannot be made.

 

LC Trucks are designed so that the panels can be stacked right up against each other for efficient storage when not in use.

 

LC Trucks allow you to place the panels, anywhere desired. Our standard connectors (straights, angles, T's) can be snapped into the tops to help hold the panels in semi-permanent positions.